Login    Register

Dyno Shootout Cork City

Planning a run or tech-day? Post the details here
  • Author
    Message

Dyno Shootout Cork City

Postby rhysmate » Thu, 14 Nov 2013 4:50 +0000

Hi Everyone,

I've organised a dyno shootout day with JDM Garage in Cork City and i'm looking for numbers.

I need a minimum of 10 cars. (No 4wd)
The cost of each car if i get 10 cars is 35 Euro

The cost of each car if i get 15+ is 30 euro.

To secure a place, put your name down on this list with the car you want to run and sent me a PM so i can sort payment in the next few weeks.

If you do send payment to me and the day is cancelled due to lack of numbers, you'll get every cent back. (We can do it through Paypal)

I'm currently aiming for the 25th of January 2014

Directions are in this Facebook page https://m.facebook.com/profile.php?id=139029956161240

1. Rhysmate (MX5 Turbo)
2. Dave - 106 Rallye
3. Paul - Accord 2.2
4. Haydn - sil80
5. L'e$kro - Mx5 and/or 205
6. Rob - Holden Ute
7. Ian - Honda Civic Special
8. Ronan - Honda Civic
9. Irial - Citroen 2cv
10. Ryankav - 106 gti
11. Dave - Honda Civic
12. Whitey - mk2 escort
13. Kevc - 106 gti

14. JDMFrank - eg6 Honda Civic
15. Mark - ep82
16. John h - Holden Ute
17. Chewypops - Fiesta Race car

18. Cian - 205 GTI
19. Cian - Mr2
20. Mr familia - familiar Turbo
21.




It'll be fun
Last edited by rhysmate on Sun, 24 Nov 2013 1:19 +0000, edited 12 times in total.
bend the rules............rule the bends

--Turbo Mx5 Build Thread Of Epic Power--
rhysmate
****

User avatar
 
Posts: 862
Joined: Thu, 16 Jun 2011 4:17 +0000
Location: CORK

Re: Dyno Shootout Cork City

Postby [L'e$kro] » Thu, 14 Nov 2013 6:27 +0000

1. Rhysmate (MX5 Turbo)
2. L'e$kro (Mx5 and/or 205 GTi)
[L'e$kro]
***
 
Posts: 413
Joined: Tue, 16 Aug 2011 11:47 +0000
Location: Cork City

Re: Dyno Shootout Cork City

Postby sidewaysreilly » Fri, 15 Nov 2013 2:52 +0000

Where are all the 5s
The perfection of a Car's beauty is that nothing should be there for beauty's sake.
sidewaysreilly
*****

User avatar
 
Posts: 2113
Joined: Wed, 02 Sep 2009 5:56 +0000
Location: Around Ireland

Re: Dyno Shootout Cork City

Postby rhysmate » Mon, 18 Nov 2013 11:47 +0000

surely we have a few from here lads?
bend the rules............rule the bends

--Turbo Mx5 Build Thread Of Epic Power--
rhysmate
****

User avatar
 
Posts: 862
Joined: Thu, 16 Jun 2011 4:17 +0000
Location: CORK

Re: Dyno Shootout Cork City

Postby rhysmate » Tue, 19 Nov 2013 11:28 +0000

list updated
bend the rules............rule the bends

--Turbo Mx5 Build Thread Of Epic Power--
rhysmate
****

User avatar
 
Posts: 862
Joined: Thu, 16 Jun 2011 4:17 +0000
Location: CORK

Re: Dyno Shootout Cork City

Postby leamyj » Tue, 19 Nov 2013 2:26 +0000

A mk2 escort eh? Better watch out for autocheck..he's on the hunt for a set of doors... :)
leamyj
*****

User avatar
 
Posts: 5230
Joined: Sat, 04 Aug 2007 2:19 +0000
Location: kildare

Re: Dyno Shootout Cork City

Postby rhysmate » Fri, 22 Nov 2013 8:57 +0000

List updated again... no more mx5s :(
bend the rules............rule the bends

--Turbo Mx5 Build Thread Of Epic Power--
rhysmate
****

User avatar
 
Posts: 862
Joined: Thu, 16 Jun 2011 4:17 +0000
Location: CORK

Re: Dyno Shootout Cork City

Postby rhysmate » Sat, 23 Nov 2013 12:38 +0000

Made a mistake on the day i thiught the 24th was a Saturday.

Its the 25th which is Saturday
bend the rules............rule the bends

--Turbo Mx5 Build Thread Of Epic Power--
rhysmate
****

User avatar
 
Posts: 862
Joined: Thu, 16 Jun 2011 4:17 +0000
Location: CORK

Re: Dyno Shootout Cork City

Postby rhysmate » Sun, 24 Nov 2013 1:09 +0000

I went to check out the dyno this week to see the setup. I couldn't be happier after it. The owner Bart is more than professional and genuinely enjoys seeing what your car can make. My car was too low to get on the dyno so he spent an hour setting the suspension up to make it fit on the dyno and then he reset it all so that it was even better than before. When it was on the dyno he made 110% sure that it was perfectly strapped down and safe. You'll Get a print out afterwards as well. I'm really looking forward to this now, its gonna be awesome.

Here's the page

https://m.facebook.com/profile.php?id=139029956161240
bend the rules............rule the bends

--Turbo Mx5 Build Thread Of Epic Power--
rhysmate
****

User avatar
 
Posts: 862
Joined: Thu, 16 Jun 2011 4:17 +0000
Location: CORK

Re: Dyno Shootout Cork City

Postby Steve » Sun, 24 Nov 2013 11:15 +0000

what kinda result did you get?
Steve
Site Admin

User avatar
 
Posts: 5510
Joined: Wed, 05 Mar 2008 10:16 +0000

Re: Dyno Shootout Cork City

Postby rhysmate » Mon, 25 Nov 2013 11:15 +0000

200 with a very conservative timing map. Knock sensor next and some timing and ill see more. My build thread had the dyno sheet in it
bend the rules............rule the bends

--Turbo Mx5 Build Thread Of Epic Power--
rhysmate
****

User avatar
 
Posts: 862
Joined: Thu, 16 Jun 2011 4:17 +0000
Location: CORK

Return to Runs and tech-days

Who is online

Users browsing this forum: No registered users and 45 guests

cron