Login    Register

hardtop loose

Need help or advice fitting or fixing something
  • Author
    Message

hardtop loose

Postby scallan » Fri, 25 Nov 2011 10:32 +0000

hi having a problem lately that my hardtop keeps coming loose at the back on the frankinstien bolts and when on a bumpy road it just bangs and bangs and is going to end up driving me mad :( so any help is appriciated

thanks james
scallan
***

User avatar
 
Posts: 472
Joined: Sat, 06 Aug 2011 10:16 +0000
Location: wexford

Re: hardtop loose

Postby charged_rs » Fri, 25 Nov 2011 11:05 +0000

scallan wrote:hi having a problem lately that my hardtop keeps coming loose at the back on the frankinstien bolts and when on a bumpy road it just bangs and bangs and is going to end up driving me mad :( so any help is appriciated

thanks james


1. remove your hardtop
2. on the chrome latches at the rear there is a little screw at the side of each latch - remove this and the latch will slide open
3. refit hardtop
4. loosen but (dont remove )the 2 exposed bolts
5. push the little plate under the 2 bolts forward as far as it will go , so it fits tightly against the mushroom bolts
6. retighten bolts
7. close latch and insert screw

job done
charged_rs
****
 
Posts: 709
Joined: Sat, 16 Jan 2010 7:32 +0000

Re: hardtop loose

Postby scallan » Fri, 25 Nov 2011 11:08 +0000

[quote="charged_rs
1. remove your hardtop
2. on the chrome latches at the rear there is a little screw at the side of each latch - remove this and the latch will slide open
3. refit hardtop
4. loosen but (dont remove )the 2 exposed bolts
5. push the little plate under the 2 bolts forward as far as it will go , so it fits tightly against the mushroom bolts
6. retighten bolts
7. close latch and insert screw

job done[/quote]


have done this probaly 10 times in the last week with no avail :roll:
scallan
***

User avatar
 
Posts: 472
Joined: Sat, 06 Aug 2011 10:16 +0000
Location: wexford

Re: hardtop loose

Postby charged_rs » Fri, 25 Nov 2011 11:21 +0000

chances are the plastic keeper ( edge) on the plate under the 2 bolts are worn out.
you need the build up the keeper again

remove plate completely and wrap the leading edge bit ( should be thick white plastic) up in insulating tape , nice and thick.

if that doest fix it them there is something seriously wrong as this is the only way to adjust your hardtop onto the mushroom bolts. :roll:
charged_rs
****
 
Posts: 709
Joined: Sat, 16 Jan 2010 7:32 +0000

Re: hardtop loose

Postby scallan » Fri, 25 Nov 2011 12:02 +0000

charged_rs wrote:chances are the plastic keeper ( edge) on the plate under the 2 bolts are worn out.
you need the build up the keeper again

remove plate completely and wrap the leading edge bit ( should be thick white plastic) up in insulating tape , nice and thick.

if that doest fix it them there is something seriously wrong as this is the only way to adjust your hardtop onto the mushroom bolts. :roll:



thanks for that charged will try it when i get home as the plastic keepers do seem a lil bit worn hopefully this will work before i go mad with the noise :bom:
scallan
***

User avatar
 
Posts: 472
Joined: Sat, 06 Aug 2011 10:16 +0000
Location: wexford

Return to How do I....

Who is online

Users browsing this forum: No registered users and 12 guests

cron