timing and cam belts

[michaeltburke]

Does anyone know what supply and fit of timing and cam belts would cost at a non dealer garage ?

[rhysmate]

they're the same belt

Where are you based?

[pjmazda]

I'd say 200 euro but you could do yourself for maybe 80 euro including buying crack locking tool etc.

[MX5Spares]

The parts required are 120e ie waterpump,2 pulleys,t.belt and coolant.!!!

[pjmazda]

Cheers robert, of course Water pump replacement not mandatory but recommended....

[Merlot man]

Rob is correct ,you might consider cam and crank shaft front oil seals as well ,there not expensive and worth doing when you/mechanic is that far .
Cam box cover gasket and cas seal also easy to do at this stage ,you've done/paid for the labour anyway
Best of luck
Brian

[michaeltburke]

Thanks for the replies ....the 250 price looks ok ...anyone in Galway do it for that...

[Steve]

Brendan Dowling in Shantalla is a bit of a living legend. He owns an MX5 too : http://www.mechanicingalway.com/

Alternatively, give Greg in Complex motors in Ballybrit/Ballybane a ring for quote : 091 759446 or 087 0918020. I've had some work done by him in the past and hes good.