CUSCO D1 ROLL BAR 7 POINT 2 SEATS AROUND DASH - NA6CE NA8C H

[Davemx-5]

https://www.rhdjapan.com/cusco-d1-roll- ... d-top.html

I have this exact roll cage sitting in a heated garage for the last two years. I decided that I only required a rear roll bar. That this was much more than what I needed.

I've test fitted it in the car, I've cut the plastic to connect the bars and bolt it up for test fitting, and then took it all apart and put it back in the box.

No bolts missing or strengthening plates.

I paid €1,200 for it, including import duty, shipping and the item.

I'd be looking around €750 for it.

I can ship for buyer, but at buyers expense.

[Davemx-5]

Bump....Will px for mazdaspeed side skirts or turbo parts

[andrew1219]

Hi what’s the best price you could do in this ? Not lookin for something as big as this but if you where offering a good price I’d be interested thanks

[Davemx-5]

Hi Andrew, only seeing this now apologies! To be honest it's already nearly half the price of what a new one imported would cost(what I paid for it) and it's amazing value at that. Feel free to pm me an offer, sure worst I can do is say no!

[Davemx-5]

Finally got around to putting this together and getting some pictures. The lock nuts are only tightened enough to hold it together so all hardware is as new. Comes with the spreader plates and everything is as new. Even comes with the original box.

PM me and can exhange more pictures etc over whattsapp or email etc.

[url="https://flic.kr/p/N73ymd"][/url][url="https://flic.kr/p/N73ymd"]20180819_112052[/url] by [url="https://www.flickr.com/photos/68072493@N07/"]davemx-5[/url], on Flickr

[url="https://flic.kr/p/LtwowX"][/url][url="https://flic.kr/p/LtwowX"]20180819_112042[/url] by [url="https://www.flickr.com/photos/68072493@N07/"]davemx-5[/url], on Flickr

[url="https://flic.kr/p/27tDdTs"][/url][url="https://flic.kr/p/27tDdTs"]20180819_112020[/url] by [url="https://www.flickr.com/photos/68072493@N07/"]davemx-5[/url], on Flickr

[url="https://flic.kr/p/28RoTnr"][/url][url="https://flic.kr/p/28RoTnr"]20180819_110505[/url] by [url="https://www.flickr.com/photos/68072493@N07/"]davemx-5[/url], on Flickr

[url="https://flic.kr/p/298Zqjm"][/url][url="https://flic.kr/p/298Zqjm"]20180819_112100[/url] by [url="https://www.flickr.com/photos/68072493@N07/"]davemx-5[/url], on Flickr

[url="https://flic.kr/p/N73ozQ"][/url][url="https://flic.kr/p/N73ozQ"]20180819_112109[/url] by [url="https://www.flickr.com/photos/68072493@N07/"]davemx-5[/url], on Flickr

[url="https://flic.kr/p/27tCQJC"][/url][url="https://flic.kr/p/27tCQJC"]20180819_112138[/url] by [url="https://www.flickr.com/photos/68072493@N07/"]davemx-5[/url], on Flickr

[url="https://flic.kr/p/28RnZgx"][/url][url="https://flic.kr/p/28RnZgx"]20180819_112159[/url] by [url="https://www.flickr.com/photos/68072493@N07/"]davemx-5[/url], on Flickr

[url="https://flic.kr/p/2aacwz7"][/url][url="https://flic.kr/p/2aacwz7"]20180819_112232[/url] by [url="https://www.flickr.com/photos/68072493@N07/"]davemx-5[/url], on Flickr

Here's some pictures of the test fitting:

IMG_5199 by davemx-5, on Flickr

IMG_5191 by davemx-5, on Flickr

IMG_5197 by davemx-5, on Flickr

[Davemx-5]

Sold!