Turbo kit
Posted: Mon, 02 Feb 2009 3:46 +0000As advertised elsewhere.. great offer!!
Even with shipping (and possible duty fees), it still might work out v.well!
Steve
contact : chad@linuxpupil.com
All Right. No takers at $1900
Here's my lowest acceptable value: $1600. If I can't get $1600 for all the
stuff listed below, I'll just put it all back on the car.
>> OK. I need to sell this thing.
>>
>> I am selling my FMII kit along with some other goodies I’ve
>> accumulated:
>>
>> FMII (BBB, 80K) for 1.8 with PS and AC, Cast downpipe (10k), Link (94-95
version),
>> RC550s,FMIC
>> Extra BEGi Downpipe with longer wastegate tube (brand new, unused)
>> FM Turbo Exhaust (80k)
>> FM High-Flow Catalytic Converter (80k)
>> Dual gauge A-Pillar pod with EGT/AFR gauge (you will need a
>> replacement EGT sensor)
>> AEM WB02 Controller (non-gauge type) Sensor dead; not included
>> YOU WILL NEED A CLUTCH! I am leaving the ACT on the car, because it’s
>> a pain to remove.
>>
>> Condition:
>>
>> The turbo has 80k miles on it. There doesn’t seem to be a noticeable
>> amount of play in the bearings. For the entire time the turbo was
>> installed, only Mobil1 was used. IC pipes have were painted yellow
>> when I bought it, but the paint has failed in a few areas where
>> surface rust started. A good sanding or media blast / repaint would
>> take care of it.
>> I replaced the original welded downpipe with a cast FM model some time
>> ago. I think it was on the car for about 10k miles. BEGi also sent
>> me a free replacement for the failed welded unit and I never got the
>> chance to install it and use it on the car before deciding to remove
>> the turbo.
>>
>>
>> Reason for sale:
>> I removed the turbo for 2 reasons: Fuel prices were climbing, and I
>> needed the money to help me pay off debts. I have held onto the turbo
>> for a year after removing it, because part of me couldn’t bear to
>> finally sell it off. I have decided to sell finally.
>>
>>
>> PRICE:
>> Buyer pays actual shipping and packaging costs. I have no idea what
>> it will cost to pack and ship all the pieces. I will pack them very
>> carefully in plastic and/or paper.
Even with shipping (and possible duty fees), it still might work out v.well!
Steve
contact : chad@linuxpupil.com
All Right. No takers at $1900
Here's my lowest acceptable value: $1600. If I can't get $1600 for all the
stuff listed below, I'll just put it all back on the car.
>> OK. I need to sell this thing.
>>
>> I am selling my FMII kit along with some other goodies I’ve
>> accumulated:
>>
>> FMII (BBB, 80K) for 1.8 with PS and AC, Cast downpipe (10k), Link (94-95
version),
>> RC550s,FMIC
>> Extra BEGi Downpipe with longer wastegate tube (brand new, unused)
>> FM Turbo Exhaust (80k)
>> FM High-Flow Catalytic Converter (80k)
>> Dual gauge A-Pillar pod with EGT/AFR gauge (you will need a
>> replacement EGT sensor)
>> AEM WB02 Controller (non-gauge type) Sensor dead; not included
>> YOU WILL NEED A CLUTCH! I am leaving the ACT on the car, because it’s
>> a pain to remove.
>>
>> Condition:
>>
>> The turbo has 80k miles on it. There doesn’t seem to be a noticeable
>> amount of play in the bearings. For the entire time the turbo was
>> installed, only Mobil1 was used. IC pipes have were painted yellow
>> when I bought it, but the paint has failed in a few areas where
>> surface rust started. A good sanding or media blast / repaint would
>> take care of it.
>> I replaced the original welded downpipe with a cast FM model some time
>> ago. I think it was on the car for about 10k miles. BEGi also sent
>> me a free replacement for the failed welded unit and I never got the
>> chance to install it and use it on the car before deciding to remove
>> the turbo.
>>
>>
>> Reason for sale:
>> I removed the turbo for 2 reasons: Fuel prices were climbing, and I
>> needed the money to help me pay off debts. I have held onto the turbo
>> for a year after removing it, because part of me couldn’t bear to
>> finally sell it off. I have decided to sell finally.
>>
>>
>> PRICE:
>> Buyer pays actual shipping and packaging costs. I have no idea what
>> it will cost to pack and ship all the pieces. I will pack them very
>> carefully in plastic and/or paper.