MX5Ireland

I have a 1.6 Greddy Turbo kit since late July/August last year which I do not need and it's taking up to much room in my garage since then.

This Greddy kit will be 'Plug & Play' for any 1.6 up to 5/6PSI

It is a mix of the 'basic' 1.6 Greddy Turbo kit and it will also have parts from my own previous build/setup which I ran with no problems at all for years. The only things you will need are the oil feed/return lines and nothing else.










You will end up with this...except you'll still have your AFM and a different air filter there going into the Turbo.


For this (100% perfect) Turbo and all of my own upgrades added in (which cost me over 250 euro) I am looking for 900 euros complete.

This kit with my setup is plug & play power - bolt it on, set your timing to 6 degrees and nothing else but GO BOOST !

If you want this with the 'totally standard' Greddy pipes/downpipe then it's 650 euros.

If you want this with my own modified Greddy downpipe then it's an extra 50 euros.

would you need a programmable ecu for this?
and a thicker head gasket for lower compression for the turbo?
might be interested in this but il look into it more 1st.
what kind of power would it be making on 6 psi?

You won't need an aftermarket ECU for this kit when running it at 6PSI and you should be making around 160bhp with it.
You don't need to change anything in the engine or any gaskets, it's a 'Plug And Play' turbo kit

SOLD Pending Payment.