Various Turbo Bits And Pieces
Posted: Mon, 11 Aug 2014 3:32 +00003 items left and some price drops.
Some general turbo bits for sale also.
Looking to sell off the turbo bits from my mk1 1.6 to fund converting it to run ITB's.
Let me know if I'm way off on my pricing.
Baileys external dump valve. Good condition.
€30
Turbo manifold and DIY downpipe to suit T25/T28 turbo. Don't know the brand of the manifold but no cracks in the 3/4 years of use. Coming off a 1.6 Mk1.
Manifold
Downpipe
€120
Denso 550cc RX7 red top injectors. Working perfectly and very hard to come by.
Better pics when removed from the car.
€220
Toyosports intercooler, piping and silicone joiners/bends. The straight pipe up to the TB has a bung for the IAT and an outlet for the ICV. Decent enough condition, some fins are bent in but still works as it should.
SOLD
Garrett T25 turbo in good condition. No crack on the wastegate port, which is rare. Very minimal play in shaft.
SOLD
Hybrid Garrett T28/T25 turbo (T28 compressor, T25 turbine) in need of a rebuild. Burning oil, usual crack around wastegate port.
Really good turbo, I got good power out of this with practically no lag.
SOLD
Oil and water lines. Oil line is braided, water lines are silicone. Oil line is taking the feed from the hole on the block as its a 1.6.
See picture of exhaust mani above for oil line location.
SOLD
Gizzmo MS-IBC electronic boost controller with loom and solenoid. Good bit of kit and works perfectly.
SOLD
Some general turbo bits for sale also.
Looking to sell off the turbo bits from my mk1 1.6 to fund converting it to run ITB's.
Let me know if I'm way off on my pricing.
Baileys external dump valve. Good condition.
€30
Turbo manifold and DIY downpipe to suit T25/T28 turbo. Don't know the brand of the manifold but no cracks in the 3/4 years of use. Coming off a 1.6 Mk1.
Manifold
Downpipe
€120
Denso 550cc RX7 red top injectors. Working perfectly and very hard to come by.
Better pics when removed from the car.
€220
Toyosports intercooler, piping and silicone joiners/bends. The straight pipe up to the TB has a bung for the IAT and an outlet for the ICV. Decent enough condition, some fins are bent in but still works as it should.
SOLD
Garrett T25 turbo in good condition. No crack on the wastegate port, which is rare. Very minimal play in shaft.
SOLD
Hybrid Garrett T28/T25 turbo (T28 compressor, T25 turbine) in need of a rebuild. Burning oil, usual crack around wastegate port.
Really good turbo, I got good power out of this with practically no lag.
SOLD
Oil and water lines. Oil line is braided, water lines are silicone. Oil line is taking the feed from the hole on the block as its a 1.6.
See picture of exhaust mani above for oil line location.
SOLD
Gizzmo MS-IBC electronic boost controller with loom and solenoid. Good bit of kit and works perfectly.
SOLD