Login    Register
  • Author
    Message

Re: Need a map (Jul/Aug 2015)

Postby Asmooh » Mon, 27 Apr 2015 6:14 +0000

Randy wrote:Do a build thread man in the project section. Would love to see how you get on with it.

just did, the start of the project :)
Asmooh
*
 
Posts: 25
Joined: Sat, 21 Mar 2015 9:55 +0000

Re: Need a map (Jul/Aug 2015)

Postby [L'e$kro] » Mon, 04 May 2015 7:38 +0000

Where about are you based?
Here in Cork, would recommend Bart @JDM Garage..


EDIT: If you have a MSPNP Gen2, you can re-wire the injectors to run in sequential mode, as the 850cc/min is quite big for firing them twice per cycle (batch mode)
Nico
[L'e$kro]
***
 
Posts: 413
Joined: Tue, 16 Aug 2011 11:47 +0000
Location: Cork City

Re: Need a map (Jul/Aug 2015)

Postby rhysmate » Mon, 04 May 2015 9:23 +0000

Are you hoping to get 400 from the 1.6?
bend the rules............rule the bends

--Turbo Mx5 Build Thread Of Epic Power--
rhysmate
****

User avatar
 
Posts: 862
Joined: Thu, 16 Jun 2011 4:17 +0000
Location: CORK

Re: Need a map (Jul/Aug 2015)

Postby sidewaysreilly » Sat, 09 May 2015 8:17 +0000

what turbo?
The perfection of a Car's beauty is that nothing should be there for beauty's sake.
sidewaysreilly
*****

User avatar
 
Posts: 2113
Joined: Wed, 02 Sep 2009 5:56 +0000
Location: Around Ireland

Re: Need a map (Jul/Aug 2015)

Postby [L'e$kro] » Sun, 10 May 2015 12:36 +0000

A Garrett GT2871R would get there, or perhaps a TD05-20G but would be at its edge.
The 1.6 head doesn't seem to flow that much, would need serious porting and defo aftermarket cams!
Nico
[L'e$kro]
***
 
Posts: 413
Joined: Tue, 16 Aug 2011 11:47 +0000
Location: Cork City

Re: Need a map (Jul/Aug 2015)

Postby Asmooh » Fri, 29 May 2015 10:35 +0000

Asmooh
*
 
Posts: 25
Joined: Sat, 21 Mar 2015 9:55 +0000

Previous

Return to Engine Mods

Who is online

Users browsing this forum: No registered users and 5 guests

cron