Login    Register
  • Author
    Message

Bee*R not working

Postby emarkey » Sat, 11 Apr 2015 5:10 +0000

Guys, I have just put in a Bee*R rev limiter into my (auto to manual swapped) 1994 1.8l eunos mk1. I have connected the wires as instructed by bee*r and numerous people online and it isnt working correctly.
If i have the Bee*r set to 4k revs and floor it, it will rev to 4k, cut some ignitions, then rev past 4k, then back to 4k, cut some ignitions again, and so on in that fashion. If working correctly it should rev to 4k and stay there making awesome happen.
Any ideas? Perhaps my bee*r is faulty.
emarkey
***
 
Posts: 271
Joined: Tue, 06 May 2014 11:59 +0000

Re: Bee*R not working

Postby scallan » Sat, 11 Apr 2015 9:47 +0000

I dont know much about them but have heard of them causing awful engine problems on nissans and toyotas.
scallan
***

User avatar
 
Posts: 472
Joined: Sat, 06 Aug 2011 10:16 +0000
Location: wexford

Re: Bee*R not working

Postby Steve » Sun, 12 Apr 2015 7:13 +0000

Is that not how its supposed to work when its working as a 2 step rev limiter?

like this :

https://www.youtube.com/watch?v=sEz4dPZH1fc
Steve
Site Admin

User avatar
 
Posts: 5515
Joined: Wed, 05 Mar 2008 10:16 +0000

Re: Bee*R not working

Postby emarkey » Mon, 13 Apr 2015 8:45 +0000

It supposed to work like in that video, but that's not what's happening at all. I will try get a video up.
emarkey
***
 
Posts: 271
Joined: Tue, 06 May 2014 11:59 +0000

Re: Bee*R not working

Postby Steve » Mon, 13 Apr 2015 12:06 +0000

also, which wires did you use for RPM and ignition?
Steve
Site Admin

User avatar
 
Posts: 5515
Joined: Wed, 05 Mar 2008 10:16 +0000

Re: Bee*R not working

Postby emarkey » Tue, 14 Apr 2015 12:59 +0000

Steve wrote:also, which wires did you use for RPM and ignition?

Rpm - Crank sensor
ignition - Cam sensor.
I installed one in my mates skyline and it worked fine, so Ill try mine on his skyline to see if my bee*r in actually broken.
emarkey
***
 
Posts: 271
Joined: Tue, 06 May 2014 11:59 +0000

Return to Engine Mods

Who is online

Users browsing this forum: No registered users and 1 guest

cron