Link at 10+ PSI ?

by **Fergus** » Tue, 10 Feb 2009 1:21 +0000

Crap

Turns out the diff was from a 97 90hp 1.6 which has the open 1.8 diff minus the damper.

I think somebody should do up one of those 'Hitler' subs on YouTube about Mazda and the Mx5 diffs...hell I may do it myself.

by **Steve** » Tue, 10 Feb 2009 1:34 +0000

Tried Traynors?

by **Fergus** » Tue, 10 Feb 2009 3:04 +0000

I heard they have a few Mx's up there alright, I'll give em a buzz tomorrow but if their cowboys with their price.....I'll let you know :shock:

by **Fergus** » Mon, 16 Feb 2009 9:15 +0000

There's a guy in the UK that has a Torsen LSD 3.6 Ratio diff with drive shafts and propshaft and hubs for £445. How does that price look ?

by **Steve** » Tue, 17 Feb 2009 12:24 +0000

Don't know dude.. I paid 250stlg for the 1.8 open diff, half shafts, prop shaft + delivery to Dublin via traynors about 5 years ago.

by **Fergus** » Tue, 17 Feb 2009 12:45 +0000

Hell that's a lot of bobs for other stuff :shock:

(edit) removed my silly question

by **Fergus** » Tue, 17 Feb 2009 9:26 +0000

There's a 2000 for breaking in Dublin, would the diff/prop/half shafts do from that year Mx5 ?
Traynors haven't gotten back to me yet.

by **Steve** » Wed, 18 Feb 2009 11:18 +0000

I *THINK* so... am 98% sure it will .. worth confirming on one of the forums tho..

btw, this is handy :
http://www.miata.net/garage/diffguide/index.html

by **Fergus** » Wed, 18 Feb 2009 8:45 +0000

The 98 was a 6 speed, perhaps the diff may have better gearing for a Turbo'd car ?

by **Fergus** » Mon, 23 Feb 2009 2:44 +0000

I've dibs on a 1.8 diff in Dublin, just waiting on it to be identified as to what type of 1.8 diff it is. It has the rubber donut thing on it.

All I need to get now is a BOV, thinking about the RFL one he he he he

by **Fergus** » Fri, 27 Feb 2009 1:21 +0000

Got a lift today from a buddy and we went up to see the 1.8 Diff Robert has from a 2000.

I bought THIS including the prop and half shafts

What type of Diff is it ? It's from a 1.8 six speed and turned out to be a 1.8 Torsen Type II LSD !!!!

I spotted this to one side and took a look at it, it's a 2.5" RS (JDM) exhaust box. I did a quick check just now online but can't seem to find 'RS' anywhere. There is Jap writing (symbols etc) on the box just after where it says 'RS'.
I decided to get it as well, what the hell etc, there is only surface discolouration on it and no rust, the car had hardly any milage on it.

So now my exhaust system is going to be 2.5" the whole way from the Turbo back.

Robert also has a set of TEN shocks with springs (as seen above), a roll cage, a perfect 1.8 engine with low milage, a set of Sport Racing Wheels in very good nic, a perfect interior (including seats etc) and a brace bar.

I'm gonna post up some pics in the 'For Sale' section, some VERY good buys if you ask me !

by **Fergus** » Fri, 27 Feb 2009 11:09 +0000

Would it be worth getting a 1.8 five speed gearbox ?
I was thinking that the gearing for the 1.8 would be 'longer' than on a 1.6, stronger also etc.

by **Steve** » Mon, 02 Mar 2009 12:09 +0000

think they are the same dude... not positive but fairly sure..

nice buys! LSD, sweet!
BTW, its worth replacing the half shaft seals + C rings on the diff/half shafts. Mine is leaking now on one side (I suspect it isn't seated properly), have just bought a replacement seal + clip.
Steve

by **Fergus** » Fri, 10 Apr 2009 12:40 +0000

Just thinking.... I have 'wheel hop' at the back end if I try to spin the wheels, I think that indicates the bushings back at the diff need replacing ?
MMMmmmm porting & polishing :shock:

(PS) BTW the exhaust is a 'Jasma Members Racing SR' rear box !!!

by **mx5ash** » Fri, 10 Apr 2009 9:44 +0000

Jasma just means Japanese Auto Muffler Association so not much to go on there.

Link at 10+ PSI ?

Re: Link at 10+ PSI ?

Re: Link at 10+ PSI ?

Who is online


	Board index ‹ Performance & Mods ‹ Engine Mods ‹ Turbo Talk Change font size Print view


	Author Message by Fergus » Tue, 10 Feb 2009 1:21 +0000 Crap Turns out the diff was from a 97 90hp 1.6 which has the open 1.8 diff minus the damper. I think somebody should do up one of those 'Hitler' subs on YouTube about Mazda and the Mx5 diffs...hell I may do it myself. Fergus *** Posts: 1912 Joined: Mon, 30 Jul 2007 5:53 +0000 Location: Ireland Top by Steve » Tue, 10 Feb 2009 1:34 +0000 Tried Traynors? Steve Site Admin Posts: 5524 Joined: Wed, 05 Mar 2008 10:16 +0000 Top by Fergus » Tue, 10 Feb 2009 3:04 +0000 I heard they have a few Mx's up there alright, I'll give em a buzz tomorrow but if their cowboys with their price.....I'll let you know Fergus * Posts: 1912 Joined: Mon, 30 Jul 2007 5:53 +0000 Location: Ireland Top by Fergus » Mon, 16 Feb 2009 9:15 +0000 There's a guy in the UK that has a Torsen LSD 3.6 Ratio diff with drive shafts and propshaft and hubs for £445. How does that price look ? Fergus * Posts: 1912 Joined: Mon, 30 Jul 2007 5:53 +0000 Location: Ireland Top by Steve » Tue, 17 Feb 2009 12:24 +0000 Don't know dude.. I paid 250stlg for the 1.8 open diff, half shafts, prop shaft + delivery to Dublin via traynors about 5 years ago. Steve Site Admin Posts: 5524 Joined: Wed, 05 Mar 2008 10:16 +0000 Top by Fergus » Tue, 17 Feb 2009 12:45 +0000 Hell that's a lot of bobs for other stuff (edit) removed my silly question Last edited by Fergus on Tue, 17 Feb 2009 9:27 +0000, edited 1 time in total. Fergus * Posts: 1912 Joined: Mon, 30 Jul 2007 5:53 +0000 Location: Ireland Top by Fergus » Tue, 17 Feb 2009 9:26 +0000 There's a 2000 for breaking in Dublin, would the diff/prop/half shafts do from that year Mx5 ? Traynors haven't gotten back to me yet. Fergus * Posts: 1912 Joined: Mon, 30 Jul 2007 5:53 +0000 Location: Ireland Top by Steve** » Wed, 18 Feb 2009 11:18 +0000 I THINK so... am 98% sure it will .. worth confirming on one of the forums tho.. btw, this is handy : http://www.miata.net/garage/diffguide/index.html Steve Site Admin Posts: 5524 Joined: Wed, 05 Mar 2008 10:16 +0000 Top by Fergus » Wed, 18 Feb 2009 8:45 +0000 The 98 was a 6 speed, perhaps the diff may have better gearing for a Turbo'd car ? Fergus *** Posts: 1912 Joined: Mon, 30 Jul 2007 5:53 +0000 Location: Ireland Top by Fergus » Mon, 23 Feb 2009 2:44 +0000 I've dibs on a 1.8 diff in Dublin, just waiting on it to be identified as to what type of 1.8 diff it is. It has the rubber donut thing on it. All I need to get now is a BOV, thinking about the RFL one he he he he Fergus * Posts: 1912 Joined: Mon, 30 Jul 2007 5:53 +0000 Location: Ireland Top by Fergus » Fri, 27 Feb 2009 1:21 +0000 Got a lift today from a buddy and we went up to see the 1.8 Diff Robert has from a 2000. I bought THIS including the prop and half shafts What type of Diff is it ? It's from a 1.8 six speed and turned out to be a 1.8 Torsen Type II LSD !!!! I spotted this to one side and took a look at it, it's a 2.5" RS (JDM) exhaust box. I did a quick check just now online but can't seem to find 'RS' anywhere. There is Jap writing (symbols etc) on the box just after where it says 'RS'. I decided to get it as well, what the hell etc, there is only surface discolouration on it and no rust, the car had hardly any milage on it. So now my exhaust system is going to be 2.5" the whole way from the Turbo back. Robert also has a set of TEN shocks with springs (as seen above), a roll cage, a perfect 1.8 engine with low milage, a set of Sport Racing Wheels in very good nic, a perfect interior (including seats etc) and a brace bar. I'm gonna post up some pics in the 'For Sale' section, some VERY good buys if you ask me ! Fergus * Posts: 1912 Joined: Mon, 30 Jul 2007 5:53 +0000 Location: Ireland Top by Fergus » Fri, 27 Feb 2009 11:09 +0000 Would it be worth getting a 1.8 five speed gearbox ? I was thinking that the gearing for the 1.8 would be 'longer' than on a 1.6, stronger also etc. Fergus * Posts: 1912 Joined: Mon, 30 Jul 2007 5:53 +0000 Location: Ireland Top by Steve » Mon, 02 Mar 2009 12:09 +0000 think they are the same dude... not positive but fairly sure.. nice buys! LSD, sweet! BTW, its worth replacing the half shaft seals + C rings on the diff/half shafts. Mine is leaking now on one side (I suspect it isn't seated properly), have just bought a replacement seal + clip. Steve Steve Site Admin Posts: 5524 Joined: Wed, 05 Mar 2008 10:16 +0000 Top Re: Link at 10+ PSI ? by Fergus » Fri, 10 Apr 2009 12:40 +0000 Just thinking.... I have 'wheel hop' at the back end if I try to spin the wheels, I think that indicates the bushings back at the diff need replacing ? MMMmmmm porting & polishing (PS) BTW the exhaust is a 'Jasma Members Racing SR' rear box !!! Fergus * Posts: 1912 Joined: Mon, 30 Jul 2007 5:53 +0000 Location: Ireland Top Re: Link at 10+ PSI ? by mx5ash » Fri, 10 Apr 2009 9:44 +0000 Jasma just means Japanese Auto Muffler Association so not much to go on there. http://www.cardomain.com/ride/3099765 "When I make a key the on position and push the button, an engine works" mx5ash * Posts: 2234 Joined: Mon, 30 Jul 2007 10:34 +0000 Location:** Dungarvan, Co Waterford Top


	Who is online Users browsing this forum: No registered users and 2 guests


	Board index The team • Delete all board cookies • All times are UTC [ DST ]