hard to change gear =/

by **james** » Tue, 27 Nov 2012 12:37 +0000

no leaks any where no fluid loss

mintex brake fluid used (its blue)

by **MX5Spares** » Tue, 27 Nov 2012 1:50 +0000

Mintex is very good so no issue there and no leaks 'must be clutch assembly itself.Try the bleeding first though

by **rhysmate** » Tue, 27 Nov 2012 4:00 +0000

what colour is the fluid in the master cylinder

by **james** » Tue, 27 Nov 2012 4:47 +0000

by **sidewaysreilly** » Tue, 27 Nov 2012 6:25 +0000

try starting the car in gear with your foot on the clutch.

by **rhysmate** » Tue, 27 Nov 2012 7:28 +0000

Sorry I thought you meant the bottle was blue haha.. usually brake fluid is light yellow but it goes black if air gets in it.. so that why I asked :-)

by **james** » Wed, 28 Nov 2012 1:06 +0000

I know it wierd allright .. blue
i will look @ the slave cylinder to see if it is leaking
If there id no leaks why would i have a spongy clutch pedal ?

by **rhysmate** » Wed, 28 Nov 2012 8:58 +0000

could be a little bit of air in that case. did you try bleed it again just to see??

by **james** » Wed, 28 Nov 2012 4:45 +0000

I will try bleed again

by **james** » Sat, 05 Jan 2013 9:07 +0000

well i got a brand new slave
i fit it and its still no better :?:

(solid pedal not spongy)

the symptoms are (when moving and cold)

*Hard to get into 2nd and 3rd
*hard to get out of 1st

by **Steve** » Sun, 06 Jan 2013 1:00 +0000

Might be your master cylinder, have a read of this thread :
http://mx5ireland.com/forum/viewtopic.php?f=8&t=5430

by **james** » Sun, 06 Jan 2013 11:13 +0000

the master is dry

by **leamyj** » Sun, 06 Jan 2013 2:32 +0000

james wrote:the master is dry

As in NO fluid??

by **sidewaysreilly** » Sun, 06 Jan 2013 4:01 +0000

Dry???that wont tell you if the seals are fecked........

by **james** » Sun, 06 Jan 2013 6:37 +0000

no lose in fluid
dry as in not leaking

hard to change gear =/

Re: hard to change gear =/

Re: hard to change gear =/

Re: hard to change gear =/

Re: hard to change gear =/

Re: hard to change gear =/

Re: hard to change gear =/

Re: hard to change gear =/

Re: hard to change gear =/

Re: hard to change gear =/

Re: hard to change gear =/

Re: hard to change gear =/

Re: hard to change gear =/

Re: hard to change gear =/

Re: hard to change gear =/

Re: hard to change gear =/

Who is online


	Board index ‹ General chat Change font size Print view


	Author Message Re: hard to change gear =/ by james » Tue, 27 Nov 2012 12:37 +0000 no leaks any where no fluid loss mintex brake fluid used (its blue) james * Posts: 388 Joined: Thu, 24 May 2012 10:20 +0000 Location: West Limerick Top Re: hard to change gear =/ by MX5Spares » Tue, 27 Nov 2012 1:50 +0000 Mintex is very good so no issue there and no leaks 'must be clutch assembly itself.Try the bleeding first though MX5Spares * Posts: 2303 Joined: Wed, 22 Sep 2010 4:59 +0000 Location: dublin, Top Re: hard to change gear =/ by rhysmate » Tue, 27 Nov 2012 4:00 +0000 what colour is the fluid in the master cylinder bend the rules............rule the bends --Turbo Mx5 Build Thread Of Epic Power-- rhysmate Posts: 862 Joined: Thu, 16 Jun 2011 4:17 +0000 Location: CORK Top Re: hard to change gear =/ by james » Tue, 27 Nov 2012 4:47 +0000 blue james * Posts: 388 Joined: Thu, 24 May 2012 10:20 +0000 Location: West Limerick Top Re: hard to change gear =/ by sidewaysreilly » Tue, 27 Nov 2012 6:25 +0000 try starting the car in gear with your foot on the clutch. The perfection of a Car's beauty is that nothing should be there for beauty's sake. sidewaysreilly *** Posts: 2113 Joined: Wed, 02 Sep 2009 5:56 +0000 Location: Around Ireland Top Re: hard to change gear =/ by rhysmate » Tue, 27 Nov 2012 7:28 +0000 Sorry I thought you meant the bottle was blue haha.. usually brake fluid is light yellow but it goes black if air gets in it.. so that why I asked bend the rules............rule the bends --Turbo Mx5 Build Thread Of Epic Power-- rhysmate Posts: 862 Joined: Thu, 16 Jun 2011 4:17 +0000 Location: CORK Top Re: hard to change gear =/ by james » Wed, 28 Nov 2012 1:06 +0000 I know it wierd allright .. blue i will look @ the slave cylinder to see if it is leaking If there id no leaks why would i have a spongy clutch pedal ? james * Posts: 388 Joined: Thu, 24 May 2012 10:20 +0000 Location: West Limerick Top Re: hard to change gear =/ by rhysmate » Wed, 28 Nov 2012 8:58 +0000 could be a little bit of air in that case. did you try bleed it again just to see?? bend the rules............rule the bends --Turbo Mx5 Build Thread Of Epic Power-- rhysmate ** Posts: 862 Joined: Thu, 16 Jun 2011 4:17 +0000 Location: CORK Top Re: hard to change gear =/ by james » Wed, 28 Nov 2012 4:45 +0000 I will try bleed again james * Posts: 388 Joined: Thu, 24 May 2012 10:20 +0000 Location: West Limerick Top Re: hard to change gear =/ by james » Sat, 05 Jan 2013 9:07 +0000 well i got a brand new slave i fit it and its still no better (solid pedal not spongy) the symptoms are (when moving and cold) Hard to get into 2nd and 3rd hard to get out of 1st james * Posts: 388 Joined: Thu, 24 May 2012 10:20 +0000 Location: West Limerick Top Re: hard to change gear =/ by Steve » Sun, 06 Jan 2013 1:00 +0000 Might be your master cylinder, have a read of this thread : http://mx5ireland.com/forum/viewtopic.php?f=8&t=5430 Steve Site Admin Posts: 5524 Joined: Wed, 05 Mar 2008 10:16 +0000 Top Re: hard to change gear =/ by james » Sun, 06 Jan 2013 11:13 +0000 the master is dry james * Posts: 388 Joined: Thu, 24 May 2012 10:20 +0000 Location: West Limerick Top Re: hard to change gear =/ by leamyj » Sun, 06 Jan 2013 2:32 +0000 james wrote:the master is dry As in NO fluid?? leamyj *** Posts: 5230 Joined: Sat, 04 Aug 2007 2:19 +0000 Location: kildare Top Re: hard to change gear =/ by sidewaysreilly » Sun, 06 Jan 2013 4:01 +0000 Dry???that wont tell you if the seals are fecked........ The perfection of a Car's beauty is that nothing should be there for beauty's sake. sidewaysreilly * Posts: 2113 Joined: Wed, 02 Sep 2009 5:56 +0000 Location: Around Ireland Top Re: hard to change gear =/ by james » Sun, 06 Jan 2013 6:37 +0000 no lose in fluid dry as in not leaking james * Posts: 388 Joined: Thu, 24 May 2012 10:20 +0000 Location: West Limerick Top


	Who is online Users browsing this forum: No registered users and 25 guests


	Board index The team • Delete all board cookies • All times are UTC [ DST ]