Login    Register

Diff oil seal fitting

Post your problems and maybe someone can help
  • Author
    Message

Diff oil seal fitting

Postby back_in_black » Mon, 14 Apr 2014 9:23 +0000

Getting ready to change my diff to a torsen type 2. Got the 2 half shaft seal and the one for the input shaft.
Before I go at it I'm wondering how you remove the input shaft to change the seal?
Thanks
Alan
back_in_black
***

User avatar
 
Posts: 496
Joined: Sat, 02 Jul 2011 9:46 +0000
Location: Kerry

Re: Diff oil seal fitting

Postby MX5Spares » Mon, 14 Apr 2014 4:19 +0000

Its unlikely front seal is leaking but are the preload settings not on the big nut in front of driveshaft flange?? If they are do not remove as diff is set up from there .If not just unbolt the flange nut and pull out.I think replacing the two outer seals is probably all you need to do.Check it out before you start work on it.
MX5Spares
*****
 
Posts: 2303
Joined: Wed, 22 Sep 2010 4:59 +0000
Location: dublin,

Re: Diff oil seal fitting

Postby back_in_black » Wed, 16 Apr 2014 7:36 +0000

Thanks Robert.
Everything looks fine on the front seal so I'll just change the sides and hopefully that will be it.
back_in_black
***

User avatar
 
Posts: 496
Joined: Sat, 02 Jul 2011 9:46 +0000
Location: Kerry

Return to Engine & drivetrain

Who is online

Users browsing this forum: No registered users and 17 guests