Help pls with clear side reflectors

by **hillymx** » Wed, 11 Feb 2009 6:32 +0000

Guys
I hAVE RECENTLY PURCHASED THE CLEAR SIDE REFLECTORS AVAILABLE ON MX5 PARTS HOWEVER AS I AM NOT CURRENTLY WIRED FOR BULBS JUST WANTED TO PUT ON FOR EFFECT. THEY HAVE PIECE JUTTING OUT OF BACK FOR WIREING AND THE ONLY SOLUTION I CAN SEE IS TO CUT THIS PIECE OFF AND SCREW FIX TO CAR LIKE THE ORIGINALS. iT LOOKS LIKE THEY MAY STICK OUT A BIT TOO FAR ....HAS ANYBODY ELSE
OVERCOME THIS THKS IN ADVANCE
HILLY

by **hillymx** » Wed, 11 Feb 2009 6:34 +0000

SORRY GUYS SHOULD HAVE SAID SHE IS 93 AND PREVIOUS OWNER HAD REMOVED ALL REFLECTORS

by **mx5ash** » Wed, 11 Feb 2009 9:32 +0000

They should just go in to the hole on your bumper. They do fit a certain way round (front and back are different and they need to be up the right way) The bit sticking out should locate into the hole in your bumper. Do you have a pic of the car/bumper for us to have a look at.

by **mx5ash** » Wed, 11 Feb 2009 9:34 +0000

See fergus's hole here

by **mrges** » Wed, 11 Feb 2009 10:46 +0000

mx5ash wrote:See fergus's hole here

I have studied the picture VERY carefully and I just don't see him......maybe he's hiding in the boot? :shock:

mrges

by **leamyj** » Thu, 12 Feb 2009 8:08 +0000

by **hillymx** » Fri, 13 Feb 2009 1:36 +0000

sorry no pics at moment as she in Garage but mine has no hole ( someone will have a good laugh at this ha ha) seriously though all I have are two screw holes poss. old owner filled in as he had removed all reflectors...that is the way i got her.

by **Geese** » Fri, 13 Feb 2009 2:51 +0000

Take a Pic, he might have sealed the hole for looks

I hope the wheel brace was take off before driving

by **Fergus** » Fri, 13 Feb 2009 3:02 +0000

OMFG Ash

I didn't give any permission for you to be showing my cars hole online man !
Jasuz christ what will my 'soon to be' ex-wife feckin think....hell, what will your soon to be new wife think pointing out holes online ?
I mean, think about all the bloody hairdressers out there, Jazus christ man !
Just as well they won't know the car to see on the road after my mod....if they don't see my post that is :shock:

by **hillymx** » Sun, 15 Feb 2009 7:40 +0000

THANKS GUYS
NOW HAVE THEM FITTED AND THEY LOOK REALLY WELL.....
YES THE HOLES HAD BEEN FILLED FOR EFFECT
RGDS
HILLY


	Board index ‹ Performance & Mods ‹ Exterior Mods Change font size Print view


	Author Message Help pls with clear side reflectors by hillymx » Wed, 11 Feb 2009 6:32 +0000 Guys I hAVE RECENTLY PURCHASED THE CLEAR SIDE REFLECTORS AVAILABLE ON MX5 PARTS HOWEVER AS I AM NOT CURRENTLY WIRED FOR BULBS JUST WANTED TO PUT ON FOR EFFECT. THEY HAVE PIECE JUTTING OUT OF BACK FOR WIREING AND THE ONLY SOLUTION I CAN SEE IS TO CUT THIS PIECE OFF AND SCREW FIX TO CAR LIKE THE ORIGINALS. iT LOOKS LIKE THEY MAY STICK OUT A BIT TOO FAR ....HAS ANYBODY ELSE OVERCOME THIS THKS IN ADVANCE HILLY hillymx * Posts: 200 Joined: Sat, 24 Jan 2009 12:47 +0000 Top by hillymx » Wed, 11 Feb 2009 6:34 +0000 SORRY GUYS SHOULD HAVE SAID SHE IS 93 AND PREVIOUS OWNER HAD REMOVED ALL REFLECTORS hillymx * Posts: 200 Joined: Sat, 24 Jan 2009 12:47 +0000 Top by mx5ash » Wed, 11 Feb 2009 9:32 +0000 They should just go in to the hole on your bumper. They do fit a certain way round (front and back are different and they need to be up the right way) The bit sticking out should locate into the hole in your bumper. Do you have a pic of the car/bumper for us to have a look at. http://www.cardomain.com/ride/3099765 "When I make a key the on position and push the button, an engine works" mx5ash *** Posts: 2234 Joined: Mon, 30 Jul 2007 10:34 +0000 Location: Dungarvan, Co Waterford Top by mx5ash » Wed, 11 Feb 2009 9:34 +0000 See fergus's hole here http://www.cardomain.com/ride/3099765 "When I make a key the on position and push the button, an engine works" mx5ash * Posts: 2234 Joined: Mon, 30 Jul 2007 10:34 +0000 Location: Dungarvan, Co Waterford Top by mrges » Wed, 11 Feb 2009 10:46 +0000 mx5ash wrote:See fergus's hole here I have studied the picture VERY carefully and I just don't see him......maybe he's hiding in the boot? mrges mrges Posts: 1065 Joined: Fri, 07 Sep 2007 11:31 +0000 Location: Midlands Top by leamyj » Thu, 12 Feb 2009 8:08 +0000 leamyj * Posts: 5230 Joined: Sat, 04 Aug 2007 2:19 +0000 Location: kildare Top by hillymx » Fri, 13 Feb 2009 1:36 +0000 sorry no pics at moment as she in Garage but mine has no hole ( someone will have a good laugh at this ha ha) seriously though all I have are two screw holes poss. old owner filled in as he had removed all reflectors...that is the way i got her. hillymx * Posts: 200 Joined: Sat, 24 Jan 2009 12:47 +0000 Top by Geese » Fri, 13 Feb 2009 2:51 +0000 Take a Pic, he might have sealed the hole for looks I hope the wheel brace was take off before driving Geese * Posts: 271 Joined: Tue, 16 Sep 2008 11:16 +0000 Location: South Dublin/ North Wicklow Top by Fergus » Fri, 13 Feb 2009 3:02 +0000 OMFG Ash I didn't give any permission for you to be showing my cars hole online man ! Jasuz christ what will my 'soon to be' ex-wife feckin think....hell, what will your soon to be new wife think pointing out holes online ? I mean, think about all the bloody hairdressers out there, Jazus christ man ! Just as well they won't know the car to see on the road after my mod....if they don't see my post that is Fergus * Posts: 1912 Joined: Mon, 30 Jul 2007 5:53 +0000 Location: Ireland Top by hillymx » Sun, 15 Feb 2009 7:40 +0000 THANKS GUYS NOW HAVE THEM FITTED AND THEY LOOK REALLY WELL..... YES THE HOLES HAD BEEN FILLED FOR EFFECT RGDS HILLY hillymx * Posts: 200 Joined: Sat, 24 Jan 2009 12:47 +0000 Top


	Who is online Users browsing this forum: No registered users and 1 guest


	Board index The team • Delete all board cookies • All times are UTC [ DST ]

Help pls with clear side reflectors

Help pls with clear side reflectors

Who is online