Login    Register

lots of mx5 bits

Got something to sell, put it here
  • Author
    Message

lots of mx5 bits

Postby mx5ideways » Wed, 17 Feb 2010 10:53 +0000

im going to strip the 1.8 1995 mx5 i have if anyone is interested in anything,theres an engine,gearbox,new clutch was fitted not long before parking it up,doorcards,interior bits,indiglo dials(mx5 parts ones),doors,wings,windows,rear bumper,front s15 bumper modified to fit(needs abit of tidying),eunos seats(w speakers)lots of other stuff 0874151903 Image Image Image Image Image
1990 Eunos Roadster 1.6: cusco coilovers, carbing front and rear strut braces, 1.8 brakes, performance engine and diff mounts, stage 2 cerametalic 6 puck 1.8 clutch with lightweight JUN 1.8 flywheel, 1.8 LSD, GReddy manifold, Garrett T25 turbo, ARTech down pipe, E-Manage blue ecu, Altezza injectors, FMIC. Zoom engineering center console, carbon fibre bonnet, garage vary front lip, lightweight garage hundred one hardtop, carbing 6 pt cage.
1999 mx5 1.8 RS: XYZ drift spec Coilovers, reversed Ssr dori dori mesh wheels, wide arches, custom bonnet with s15 vent, rx8 spoiler, carbon rx7 sideskirts, full Arc induction kit, heated electric leather rx8 seats.
mx5ideways
****
 
Posts: 523
Joined: Mon, 13 Aug 2007 7:36 +0000
Location: cork/limerick

Re: lots of mx5 bits

Postby twail » Wed, 17 Feb 2010 11:06 +0000

How much for the diff, half shafts and prop?

And is it a standard open diff in it?

Thanks :wink:
twail
***
 
Posts: 107
Joined: Tue, 20 Oct 2009 11:52 +0000

Re: lots of mx5 bits

Postby mx5ideways » Wed, 17 Feb 2010 11:43 +0000

twail wrote:How much for the diff, half shafts and prop?

And is it a standard open diff in it?

Thanks :wink:

the lsd is gone but i have a 1.8 open diff alright with prop and halfshafts too (€200)
1990 Eunos Roadster 1.6: cusco coilovers, carbing front and rear strut braces, 1.8 brakes, performance engine and diff mounts, stage 2 cerametalic 6 puck 1.8 clutch with lightweight JUN 1.8 flywheel, 1.8 LSD, GReddy manifold, Garrett T25 turbo, ARTech down pipe, E-Manage blue ecu, Altezza injectors, FMIC. Zoom engineering center console, carbon fibre bonnet, garage vary front lip, lightweight garage hundred one hardtop, carbing 6 pt cage.
1999 mx5 1.8 RS: XYZ drift spec Coilovers, reversed Ssr dori dori mesh wheels, wide arches, custom bonnet with s15 vent, rx8 spoiler, carbon rx7 sideskirts, full Arc induction kit, heated electric leather rx8 seats.
mx5ideways
****
 
Posts: 523
Joined: Mon, 13 Aug 2007 7:36 +0000
Location: cork/limerick

Re: lots of mx5 bits

Postby sidewaysreilly » Wed, 17 Feb 2010 11:46 +0000

price for the engine?????
The perfection of a Car's beauty is that nothing should be there for beauty's sake.
sidewaysreilly
*****

User avatar
 
Posts: 2113
Joined: Wed, 02 Sep 2009 5:56 +0000
Location: Around Ireland

Re: lots of mx5 bits

Postby TeenaG » Thu, 18 Feb 2010 1:00 +0000

....why....? :shock:
Climbed Elbrus, Island Peak, Kilimanjaro, Elgon, Everest BC, Mulhacen, Elgon, Kayaked the Liffey to the Nile, swam the Liffey, the Lee & packed ten triathlons into a year... catch me blogging on: http://www.teenagates.com
TeenaG
****

User avatar
 
Posts: 688
Joined: Mon, 07 Sep 2009 11:30 +0000
Location: Dublin

Re: lots of mx5 bits

Postby mx5lude » Thu, 18 Feb 2010 3:57 +0000

pm sent about the seats :D
Image
mx5lude
**
 
Posts: 63
Joined: Sun, 03 Jan 2010 5:19 +0000
Location: Co Derry

Re: lots of mx5 bits

Postby Medic5 » Thu, 18 Feb 2010 9:50 +0000

How much for the dials and have you a motor for a passenger side window?
Medic5
****

User avatar
 
Posts: 907
Joined: Wed, 31 Oct 2007 12:34 +0000
Location: Galway

Re: lots of mx5 bits

Postby charged_rs » Thu, 18 Feb 2010 9:58 +0000

how many miles on the engine ?
running ok ? any smoke or noises?

how much ?
charged_rs
****
 
Posts: 709
Joined: Sat, 16 Jan 2010 7:32 +0000

Re: lots of mx5 bits

Postby Steve » Thu, 18 Feb 2010 11:10 +0000

How much are the :

door cards
calipers
boot lid
and rear bumper?

Thanks
Steve
Steve
Site Admin

User avatar
 
Posts: 5529
Joined: Wed, 05 Mar 2008 10:16 +0000

Re: lots of mx5 bits

Postby 83ste » Thu, 18 Feb 2010 11:57 +0000

How much for the two front indicator/sidelight lenses? Tasty looking intake on the engine, too, would you sell that seperately? May possibly be interested in either or both front wings, too.
83ste
**

User avatar
 
Posts: 50
Joined: Fri, 08 May 2009 9:51 +0000
Location: Dublin

Re: lots of mx5 bits

Postby mx5ideways » Fri, 19 Feb 2010 1:41 +0000

charged_rs wrote:how many miles on the engine ?
running ok ? any smoke or noises?

how much ?

no smoke but a little tapity when cold,went away when warm,the milage was high enough i think around 160000miles but il check when im home again,there was a water pump and timing belt done on it too about a month or 2 before i parked it up,id take 200 for it,i paid half that for the rocker cover alone.would be a nice engine to strip down and rebuild for a turbo project with the extra cc in it
1990 Eunos Roadster 1.6: cusco coilovers, carbing front and rear strut braces, 1.8 brakes, performance engine and diff mounts, stage 2 cerametalic 6 puck 1.8 clutch with lightweight JUN 1.8 flywheel, 1.8 LSD, GReddy manifold, Garrett T25 turbo, ARTech down pipe, E-Manage blue ecu, Altezza injectors, FMIC. Zoom engineering center console, carbon fibre bonnet, garage vary front lip, lightweight garage hundred one hardtop, carbing 6 pt cage.
1999 mx5 1.8 RS: XYZ drift spec Coilovers, reversed Ssr dori dori mesh wheels, wide arches, custom bonnet with s15 vent, rx8 spoiler, carbon rx7 sideskirts, full Arc induction kit, heated electric leather rx8 seats.
mx5ideways
****
 
Posts: 523
Joined: Mon, 13 Aug 2007 7:36 +0000
Location: cork/limerick

Re: lots of mx5 bits

Postby mx5ideways » Fri, 19 Feb 2010 1:50 +0000

Medic5 wrote:How much for the dials and have you a motor for a passenger side window?

100 for the dials(there nearly 200 inc postage from mx5parts),ya i have a motor but id rather not split it from the cable etc,i suppose 30 euro if i did though
1990 Eunos Roadster 1.6: cusco coilovers, carbing front and rear strut braces, 1.8 brakes, performance engine and diff mounts, stage 2 cerametalic 6 puck 1.8 clutch with lightweight JUN 1.8 flywheel, 1.8 LSD, GReddy manifold, Garrett T25 turbo, ARTech down pipe, E-Manage blue ecu, Altezza injectors, FMIC. Zoom engineering center console, carbon fibre bonnet, garage vary front lip, lightweight garage hundred one hardtop, carbing 6 pt cage.
1999 mx5 1.8 RS: XYZ drift spec Coilovers, reversed Ssr dori dori mesh wheels, wide arches, custom bonnet with s15 vent, rx8 spoiler, carbon rx7 sideskirts, full Arc induction kit, heated electric leather rx8 seats.
mx5ideways
****
 
Posts: 523
Joined: Mon, 13 Aug 2007 7:36 +0000
Location: cork/limerick

Re: lots of mx5 bits

Postby mx5ideways » Fri, 19 Feb 2010 2:05 +0000

How much are the :

door cards 50 euro for the 2 eunos ones,good cond,i also have custom made ones covered in blue material with a blue neon rope light running under the black piece on the top of it 100 for the 2 of them
calipers50 euro a corner with good brake pads,1.6 only left though
boot lid60
and rear bumper?60
il post more better quality pics of stuff up when im home again
1990 Eunos Roadster 1.6: cusco coilovers, carbing front and rear strut braces, 1.8 brakes, performance engine and diff mounts, stage 2 cerametalic 6 puck 1.8 clutch with lightweight JUN 1.8 flywheel, 1.8 LSD, GReddy manifold, Garrett T25 turbo, ARTech down pipe, E-Manage blue ecu, Altezza injectors, FMIC. Zoom engineering center console, carbon fibre bonnet, garage vary front lip, lightweight garage hundred one hardtop, carbing 6 pt cage.
1999 mx5 1.8 RS: XYZ drift spec Coilovers, reversed Ssr dori dori mesh wheels, wide arches, custom bonnet with s15 vent, rx8 spoiler, carbon rx7 sideskirts, full Arc induction kit, heated electric leather rx8 seats.
mx5ideways
****
 
Posts: 523
Joined: Mon, 13 Aug 2007 7:36 +0000
Location: cork/limerick

Re: lots of mx5 bits

Postby anniniwa » Fri, 19 Feb 2010 11:01 +0000

Hey, just wondering if you have mudgaurds...didn't see any in the pic.

Thanks
Ann
anniniwa
****

User avatar
 
Posts: 894
Joined: Tue, 23 Jun 2009 2:17 +0000

Re: lots of mx5 bits

Postby leamyj » Fri, 19 Feb 2010 2:29 +0000

anniniwa wrote:Hey, just wondering if you have mudgaurds...didn't see any in the pic.

Thanks
Ann


mx5ideways had a black car that was being stripped out last time I was down there, maybe there were mudguards on that, black would suit you down to the ground Ann( well almost to the ground!)
Kieran??
leamyj
*****

User avatar
 
Posts: 5230
Joined: Sat, 04 Aug 2007 2:19 +0000
Location: kildare

Next

Return to For sale

Who is online

Users browsing this forum: No registered users and 0 guests