Mk1 Stainless steel Grille

[Geese]

I'm just gauging interest for a run of Mk1 grille. Like this one here http://www.mx5parts.co.uk/product_info. ... cts_id/177
Of course they'll be cheaper thank 30stg.

They'll be the usual stainless steel.

well who's interested?

[jaybond]

Count me in

[Roleary780]

me too..

[Piers14]

I'll take one.. Should work well at keeping gravel out of the rad...

Piers

[s-mac]

Would be interested in one of these aswell

[Geese]

Thanks for all the replies.

I've got the grille drawn up on the computer so i can produce them at any time. I'm just trying to find the soft edging to put around the edges to it doesn't damage the paintwork around the bumper.

[sidewaysreilly]

get some petrol hose from a motor factors. I used gates 4mm, cut the braiding off the outside and a sharp blade to cut it . Works really well for front spoilers and its cheap.

[leamyj]

get some petrol hose from a motor factors. I used gates 4mm, cut the braiding off the outside and a sharp blade to cut it . Works really well for front spoilers and its cheap.

McGyver strikes again!!

[Geese]

Ok guys i've got the prototype done. Who in the dublin area would like one? I just want to make sure 100% it fits.

[Piers14]

Well, I'm in Leopardstown if that suits...

[Geese]

Here's a pic

[Steve]

wow, v.nice!

[Piers14]

Looks good.. Is it heavy?

[decoy]

very intersted, and im living in south dublin

[Geese]

Sorry the missus had me lately.

Heavy? probably 300grams definetly less than 1kg it's 1.2mm stainless steel so it's robust. I find the really thin stuff like 0.7 just deforms.