Mk1 Stainless steel Grille

[leamyj]

Sorry the missus had me lately.

Lucky you!!

[Piers14]

Sounds good Geese..

[sidewaysreilly]

good man, keep her lit.....

[s-mac]

Any update on these, are they availible yet?

[Geese]

Sorry lads had a driving test there a while back been busy.

I've tested the fit on a donor Mk1 and it's very very snug which is good.

I'll work out a price soon

[MaXimu5]

Looks good, does nose cone need to be removed to fit it? Got a price yet, I might be interested.
MaXimus

[Geese]

I fitted it without the nose being removed.

I'm going to offer them at 15euro each for mx5ireland users. 5 euro shipping by courier.


please pm me or email me 1122334 at gmail dot com

[Geese]

Thanks for all the replies guys and gals.

just letting you all know the first batch is sold. I'll post up when i have the second batch ready.

If you're interested in one please let me know so i can gauge how many i need to make for the next lot.

[jaybond]

Count me in


Sent from my iPhone using Tapatalk

[Geese]

Ok guys and gals. I have the second batch ready for monday.

There's some bad news. I can't hold the 15 euro price they take at least double the time of the slam panels.

So the updated price is 25euro each with free shipping.

The slam panels are 20 euro Including teh shipping

Or both slam panel and the grill for 40euro including shipping

[Piers14]

I'll take a grille. Just let me know how you want payment..

Thanks,

Piers

[jaybond]

Got my grill today and it looks great. No sure how to fit it though. Any suggestions anyone?

[leamyj]

Me too. Looking good, will have to wait until the weekend to try fitting it, Jay, I'll let you know how I get on!

[Geese]

The grill should fit all MK1. MX-5's with or without tie-down hooks, and also if you have spot/fog lamps fitted. (With the hooks fitted you will have to make some extra cuts at each end of the grill.) The finished grill is held in place with 4 thin cable ties. These are fed through the grill and then around the plastic pillars in the intake.

Also i found fitting edging on the lower half is is benificial to stop scratching. You can buy the edging in the motor factors (door edging) or use 2 layers of insulation tape.

[jaybond]

Here she is. Bowed it and the put it in place ( time for a good polish on the rest of the car)