|
by Fergus » Sun, 07 Oct 2012 12:01 +0000
200% with you about that garage - stay well away from them as they 'did a cowboy job' letting it go out on the road with oil dripping down on the exhaust manifold. If you get the parts I'll fit them for you no probs & no charge I'd also like to find out more information about the Emanage piggyback running with only a Wideband and no standard O2 sensor as that doesn't seem right to me One of my friends is a welder and we can also sort out the location of where the Wideband sensor flange is - I wouldn't even put a standard O2 sensor in that location as it's way way to hot and you'll never get a 'good' tune. I think I may even have a spare flange here somewhere. Anyway, when you have those parts give me a buzz and we'll sort out all these issues.
-
Fergus
- *****
-
- Posts: 1912
- Joined: Mon, 30 Jul 2007 5:53 +0000
- Location: Ireland
by leamyj » Sun, 07 Oct 2012 1:37 +0000
Jayzus Kieran, it's turning into a right saga, but it WILL get there..I look forward to seeing the end result and Fergus is probably the only person in this country that could take an mx5 apart and put it back together........ blindfolded!!!
John
-
leamyj
- *****
-
- Posts: 5230
- Joined: Sat, 04 Aug 2007 2:19 +0000
- Location: kildare
by johnv » Sun, 07 Oct 2012 2:03 +0000
fair play to ferus thats what this forum is all about helping each other
-
johnv
- ****
-
- Posts: 638
- Joined: Sat, 21 Mar 2009 4:52 +0000
- Location: wicklow
by rhysmate » Sun, 07 Oct 2012 4:25 +0000
if you want to organise a tech day at my shed id be more than happy to Ciaran! Can't leave a man hanging
-
rhysmate
- ****
-
- Posts: 862
- Joined: Thu, 16 Jun 2011 4:17 +0000
- Location: CORK
by 2me » Sun, 07 Oct 2012 9:42 +0000
Id love to help but not sure if I would be of any assistance. Dont forget me for that Torsen that might free up a bit of cash for you. Ill give you a bell during the week.
-
2me
- **
-
- Posts: 72
- Joined: Mon, 07 Jun 2010 1:24 +0000
by Fergus » Sun, 07 Oct 2012 9:43 +0000
leamyj wrote:Jayzus Kieran, it's turning into a right saga, but it WILL get there..I look forward to seeing the end result and Fergus is probably the only person in this country that could take an mx5 apart and put it back together........ blindfolded!!!
John
" If Carlsberg fixed Mazda Mx5s...... Fergus would be there...... wearing a blindfold"
-
Fergus
- *****
-
- Posts: 1912
- Joined: Mon, 30 Jul 2007 5:53 +0000
- Location: Ireland
by Fergus » Sun, 07 Oct 2012 9:49 +0000
johnv wrote:fair play to ferus thats what this forum is all about helping each other
Exactly I would have 'stepped in' earlier but I know nadda about the Emanage & we all thought the car was going to professionals at the time. We'll get it sorted out though
-
Fergus
- *****
-
- Posts: 1912
- Joined: Mon, 30 Jul 2007 5:53 +0000
- Location: Ireland
by Fergus » Sun, 07 Oct 2012 9:57 +0000
rhysmate wrote:if you want to organise a tech day at my shed id be more than happy to Ciaran! Can't leave a man hanging
Nice, sounds like a plan is coming together ! TechDay at rhysmate's place so !! Anyone in the Cork area that wants to turn up is welcome, if you have things needed to do to your cars, have questions or are just interested in seeing Turbo'd Mx5 monsters then "Welcome To The Dark Side" as we turbo heads say Ciaran & rhysmate can set date/time
-
Fergus
- *****
-
- Posts: 1912
- Joined: Mon, 30 Jul 2007 5:53 +0000
- Location: Ireland
by Fergus » Sun, 07 Oct 2012 10:01 +0000
2me wrote:Id love to help but not sure if I would be of any assistance. Dont forget me for that Torsen that might free up a bit of cash for you. Ill give you a bell during the week.
You can be on 'Tool Handing/Fetching Duty' so Or you can just lean up against a wall and support it with a cup of tea in hand - just turn up and meet Mx5 Ireland members, that's what this is all about, no need to actually do anything
-
Fergus
- *****
-
- Posts: 1912
- Joined: Mon, 30 Jul 2007 5:53 +0000
- Location: Ireland
by rhysmate » Sun, 07 Oct 2012 10:36 +0000
i won't be free anytime during the week but i might be ok for Saturday or Sunday this weekend?? let me just check and ill get back to you but we can say it provisionally?
im gonna need some help by then anyway from anyone who is willing... I'm not far off being boosted too... good plan!
-
rhysmate
- ****
-
- Posts: 862
- Joined: Thu, 16 Jun 2011 4:17 +0000
- Location: CORK
by mx5ideways » Sun, 07 Oct 2012 11:47 +0000
Thanks a million lads, il look at my roster and see when I've a day off
1990 Eunos Roadster 1.6: cusco coilovers, carbing front and rear strut braces, 1.8 brakes, performance engine and diff mounts, stage 2 cerametalic 6 puck 1.8 clutch with lightweight JUN 1.8 flywheel, 1.8 LSD, GReddy manifold, Garrett T25 turbo, ARTech down pipe, E-Manage blue ecu, Altezza injectors, FMIC. Zoom engineering center console, carbon fibre bonnet, garage vary front lip, lightweight garage hundred one hardtop, carbing 6 pt cage. 1999 mx5 1.8 RS: XYZ drift spec Coilovers, reversed Ssr dori dori mesh wheels, wide arches, custom bonnet with s15 vent, rx8 spoiler, carbon rx7 sideskirts, full Arc induction kit, heated electric leather rx8 seats.
-
mx5ideways
- ****
-
- Posts: 523
- Joined: Mon, 13 Aug 2007 7:36 +0000
- Location: cork/limerick
-
by rhysmate » Mon, 08 Oct 2012 8:00 +0000
Ciaran got onto me there about the 21st... So we may aim for that?
-
rhysmate
- ****
-
- Posts: 862
- Joined: Thu, 16 Jun 2011 4:17 +0000
- Location: CORK
by mx5ideways » Mon, 08 Oct 2012 8:37 +0000
Ya I'm working all next weekend and my only other day off is Tuesday's so the 21st is the only day really, I know a women in Blarney too with a mx5 and some scumbags are after slashing her roof, I told her if she can get a replacement soon we'd be able to help her fit it, could do that sunday too if we had enough help? anyone have a good soft top for sale on frame so it's easier to change? Robert would you have any?
1990 Eunos Roadster 1.6: cusco coilovers, carbing front and rear strut braces, 1.8 brakes, performance engine and diff mounts, stage 2 cerametalic 6 puck 1.8 clutch with lightweight JUN 1.8 flywheel, 1.8 LSD, GReddy manifold, Garrett T25 turbo, ARTech down pipe, E-Manage blue ecu, Altezza injectors, FMIC. Zoom engineering center console, carbon fibre bonnet, garage vary front lip, lightweight garage hundred one hardtop, carbing 6 pt cage. 1999 mx5 1.8 RS: XYZ drift spec Coilovers, reversed Ssr dori dori mesh wheels, wide arches, custom bonnet with s15 vent, rx8 spoiler, carbon rx7 sideskirts, full Arc induction kit, heated electric leather rx8 seats.
-
mx5ideways
- ****
-
- Posts: 523
- Joined: Mon, 13 Aug 2007 7:36 +0000
- Location: cork/limerick
-
by Steve » Mon, 08 Oct 2012 10:40 +0000
Will try to get down on the Sunday, will let you know.
-
Steve
- Site Admin
-
- Posts: 5524
- Joined: Wed, 05 Mar 2008 10:16 +0000
by rhysmate » Mon, 08 Oct 2012 10:46 +0000
Cool.. ill get a thread going now
-
rhysmate
- ****
-
- Posts: 862
- Joined: Thu, 16 Jun 2011 4:17 +0000
- Location: CORK
| |