Login    Register

Not Starting

Post your problems and maybe someone can help
  • Author
    Message

Not Starting

Postby Jellybean » Tue, 09 Jul 2013 3:08 +0000

Hey

First Gen Mx5, 1994 1.8

We are painting the weld-in rollcage in the car so we have taking out the dash, disconnected the Dash from the Loom etc, we changed the TBelt also

Q: The car wont start , she turns over but wont fire up; would taking out the dash cause this?

The Fuel pump is not priming and the no spark, check all the fuses , all are fine, all engine sensor connections look good, nothing is loose
Jellybean
*
 
Posts: 9
Joined: Tue, 16 Apr 2013 2:44 +0000

Re: Not Starting

Postby charged_rs » Tue, 09 Jul 2013 4:10 +0000

the 2 plugs on the coilpack - make sure you have pluged them into the right sockets - its easy to plug them into the worng ones - hence it will crank and not fire
charged_rs
****
 
Posts: 709
Joined: Sat, 16 Jan 2010 7:32 +0000

Re: Not Starting

Postby Jellybean » Tue, 09 Jul 2013 4:23 +0000

Still doesn't explain the fuel pump not priming

Does the CAS Sensor go via the Tacho in the Dash, maybe this is why it is not firing

The Dash is still out
Jellybean
*
 
Posts: 9
Joined: Tue, 16 Apr 2013 2:44 +0000

Re: Not Starting

Postby pjmazda » Tue, 09 Jul 2013 8:46 +0000

Wonder did the fuel pump relay under that dash shake loose?
pjmazda
**
 
Posts: 65
Joined: Fri, 24 Dec 2010 12:13 +0000

Re: Not Starting

Postby MX5Spares » Tue, 09 Jul 2013 9:05 +0000

Plug in the dash clocks temporarily and check
MX5Spares
*****
 
Posts: 2303
Joined: Wed, 22 Sep 2010 4:59 +0000
Location: dublin,

Re: Not Starting

Postby sidewaysreilly » Tue, 09 Jul 2013 11:38 +0000

Did you make a note of what you did while disconnecting the dash?
Just follow this procedure in reverse.
I take it the car started before this?
The perfection of a Car's beauty is that nothing should be there for beauty's sake.
sidewaysreilly
*****

User avatar
 
Posts: 2113
Joined: Wed, 02 Sep 2009 5:56 +0000
Location: Around Ireland

Re: Not Starting

Postby Jellybean » Tue, 06 Aug 2013 11:30 +0000

Latest updates, spend about 8 hrs on her yesterday

The little MX has electrical problems!
You could say the MX5 has 2 engine looms , one half of the loom is attached to the Dash and the other to the firewall, to make things easier for us we disconnected the loom from the Dash and took the dash out of there so we could trace and diagnose issues a lot easier.
The only items not connected are the two footwell lights (either side of the centre console) and cigarette lighter (all three are integrated to the dash) but these will not cause the car not to start.
Issues
Early morning Scenario

· The fuel pump was priming and we had dash lights, looks light an earth was disconnected over in the passenger dash area
· no spark
· Could not find any continuity within the harness between the ignition coil loom pins and the corresponding ECU loom pins ( forget the wire colors but I can get them)
· No relay clicking
· No revs on the tacho when trying to crank her

Current Scenario
· In order to trace the wires for the ignition coil we removed the dash and harness from the dash, reconnected everything minus two footwell lights (either side of the centre console) and cigarette lighter
· Now we have no dash lights, Charge, Brake .. but it will show the symbol if we turn on the headlights, indicators
· No fuel pump working

Any advice, we are thinking a relay is gone, fuses are all fine , inside and out plus all grounds are triple checked.
Jellybean
*
 
Posts: 9
Joined: Tue, 16 Apr 2013 2:44 +0000

Return to Engine & drivetrain

Who is online

Users browsing this forum: No registered users and 13 guests