MX5Ireland • View topic

by **mx5ideways** » Tue, 02 Sep 2008 11:46 +0000

would anyone here be able to help me fit the lsd i got for my car maybe sometime next week or show me/talk me through it?,id have a go at it but dont want to mess it up,is it a big job?

by **mx5ash** » Wed, 03 Sep 2008 6:24 +0000

Its not really a huge job mate. Are you replacing a 1.6 with a 1.6 lsd. if so you don't need to swap out the half shafts. I did mine myself. You need good access under the car (axle stands or blocks) and a decent socket set with extension bars.
Guide here
http://www.mx5ireland.com/set_tech.htm

by **Steve** » Wed, 03 Sep 2008 4:34 +0000

I'm afraid I'm up the walls here at home for the next while.. but feel free to give me a buzz if you get stuck. Its not as daunting as it looks.. hardest bit is getting the diff off/onto the PowerPlantFrame.

Steve

by **mx5ideways** » Wed, 03 Sep 2008 9:35 +0000

ok thanks lads il have a go at it next week when i get it back on the road,its a 1.8 lsd going into a 1.8 car.

by **mx5ash** » Thu, 04 Sep 2008 10:14 +0000

Same here about the busy thing but feel free to give me a ring.


	Board index ‹ Problems ‹ Engine & drivetrain Change font size Print view


	Author Message lsd by mx5ideways » Tue, 02 Sep 2008 11:46 +0000 would anyone here be able to help me fit the lsd i got for my car maybe sometime next week or show me/talk me through it?,id have a go at it but dont want to mess it up,is it a big job? 1990 Eunos Roadster 1.6: cusco coilovers, carbing front and rear strut braces, 1.8 brakes, performance engine and diff mounts, stage 2 cerametalic 6 puck 1.8 clutch with lightweight JUN 1.8 flywheel, 1.8 LSD, GReddy manifold, Garrett T25 turbo, ARTech down pipe, E-Manage blue ecu, Altezza injectors, FMIC. Zoom engineering center console, carbon fibre bonnet, garage vary front lip, lightweight garage hundred one hardtop, carbing 6 pt cage. 1999 mx5 1.8 RS: XYZ drift spec Coilovers, reversed Ssr dori dori mesh wheels, wide arches, custom bonnet with s15 vent, rx8 spoiler, carbon rx7 sideskirts, full Arc induction kit, heated electric leather rx8 seats. mx5ideways ** Posts: 523 Joined: Mon, 13 Aug 2007 7:36 +0000 Location: cork/limerick YIM Top by mx5ash » Wed, 03 Sep 2008 6:24 +0000 Its not really a huge job mate. Are you replacing a 1.6 with a 1.6 lsd. if so you don't need to swap out the half shafts. I did mine myself. You need good access under the car (axle stands or blocks) and a decent socket set with extension bars. Guide here http://www.mx5ireland.com/set_tech.htm http://www.cardomain.com/ride/3099765 "When I make a key the on position and push the button, an engine works" mx5ash * Posts: 2234 Joined: Mon, 30 Jul 2007 10:34 +0000 Location: Dungarvan, Co Waterford Top by Steve » Wed, 03 Sep 2008 4:34 +0000 I'm afraid I'm up the walls here at home for the next while.. but feel free to give me a buzz if you get stuck. Its not as daunting as it looks.. hardest bit is getting the diff off/onto the PowerPlantFrame. Steve Steve Site Admin Posts: 5526 Joined: Wed, 05 Mar 2008 10:16 +0000 Top thanks lads by mx5ideways » Wed, 03 Sep 2008 9:35 +0000 ok thanks lads il have a go at it next week when i get it back on the road,its a 1.8 lsd going into a 1.8 car. 1990 Eunos Roadster 1.6: cusco coilovers, carbing front and rear strut braces, 1.8 brakes, performance engine and diff mounts, stage 2 cerametalic 6 puck 1.8 clutch with lightweight JUN 1.8 flywheel, 1.8 LSD, GReddy manifold, Garrett T25 turbo, ARTech down pipe, E-Manage blue ecu, Altezza injectors, FMIC. Zoom engineering center console, carbon fibre bonnet, garage vary front lip, lightweight garage hundred one hardtop, carbing 6 pt cage. 1999 mx5 1.8 RS: XYZ drift spec Coilovers, reversed Ssr dori dori mesh wheels, wide arches, custom bonnet with s15 vent, rx8 spoiler, carbon rx7 sideskirts, full Arc induction kit, heated electric leather rx8 seats. mx5ideways Posts: 523 Joined: Mon, 13 Aug 2007 7:36 +0000 Location: cork/limerick YIM Top by mx5ash » Thu, 04 Sep 2008 10:14 +0000 Same here about the busy thing but feel free to give me a ring. http://www.cardomain.com/ride/3099765 "When I make a key the on position and push the button, an engine works" mx5ash * Posts: 2234 Joined: Mon, 30 Jul 2007 10:34 +0000 Location:** Dungarvan, Co Waterford Top


	Who is online Users browsing this forum: No registered users and 8 guests


	Board index The team • Delete all board cookies • All times are UTC [ DST ]

lsd

lsd

thanks lads

Who is online